Dyadic Type Wheat Turbine Metal Milling Machines With Dust Collector

Main Application:

Mainly used in pharmaceutical, chemical, food industry such as ginger, chili, pepper, wheat, soybean, star anise, cinnamon, dried vegetables, and other materials in the crushing process low hardness, fineness of 30-150 mesh adjusted between high yield, fine grain size, low noise, low energy consumption, simple maintenance, and easy to install, especially for oil, viscous, heat-sensitive, fibrous materials such as low hardness crushing process.

Structure:

main chassis, door, turbine, shaft, screen, pulleys and motors and other component parts

Working Principle:

While working, the motor drives shaft and the turbine to a high speed rotation about 7500 rpm . When the materials are fed from the hopper into the chambler, they are rubbed and compacted by the inside blades again and again. When crushing the material, turbine will inhale a large amount of air to cool the machine and convey the materials.

The bearing patrs of the turbine pulverizer equips a special maze to seal, so that it can avoid the dust entering into the bearing cavity to extend the use life. The silicon rubber gasket in the door can prevent the dust leaking and protect the operation environment.

Features:
  1, crushing capacity, low energy consumption, the product is relatively small fineness.
  2, smashing a large space, high-strength generated when the turbine operating pressure, not only to increase production capacity, reduce over crushed, and it can effectively avoid crushing the material in the production of the screen during the deposition and clogging.
  3, due to enhanced shear, therefore the fibrous material and the grinding capacity of equipment than the average high.
  4, the screen of the installation of facilities, location and reliable, are used plug-in. Relative to the ring will be screened by the form of life a lot higher.
  5, the design Built-in motor, the machine's center of gravity lower, effectively reducing the noise of the equipment
 

Technical Parameters:

Attention: If you are not satisfied, don't be disappointed. The images and parameters are not comprehensive at the webpage. You can tell us your request and we will recommend one to you. And also customizable, our engineer can exclusively design for you.

Service:

According to different customer requirements, we can provide integral design and production as follows:

Consultation: We can offer plant designers, powder experts, mechanists, electricians and consultants in other industries based on good contact with customers;

Modernization: We can design and make automatic powder coating production lines for customers;

Maintenance: We can provide requirement and standard-oriented maintenance packages, such as inspection of spare parts and maintenance of gear boxes;

Training: We can provide all kinds of trainings, e.g. installation training, commissioning training and maintenance training. 

FAQ:

How to order from us?

It's simple, when every detailes of the mixer is confirmed between us, we will issue out the PI for deposit

How to know the machine is quality or not?

We will send you details and photos when the machines is under production and send you the testing video when finished.

How to make sure we will ship out the machines when you send rest payment?

We will send you the Bill of Lading after we ship out the machines.

How to keep the maintenance?

The machine is ready to use design and test ok when delivered, only to keep the motors clean and dry, the bearings with enough grease (add grease each year)

packaging&shipping